Cutting board is produced by the longitudinal sawing logs, compliance with rectangular cross-section parameters. Common parameters: width of the board (typically over 200 mm) is greater than twice the thickness (less than 100 mm). There are several distinct dimensional GOST standards boards of this type. The raw material for lumber is mostly softwood and some hardwoods. Timber is widely in demand for building (floors, roofs), finishing the exterior or interior work, as raw material for the production of furniture, as well as for different applications in the farm. Cutting board is dried, which can be produced using different technologies.


The board has standard dimensions - Length 6000 mm:

Width  100 - 300 mm.

Thickness 20 - 50 mm.


















Таблица расчетов
толщина ширина длина кубов в штуке м2 в кубе вес в штуке
25 100 6000 0.015 - -
25 150 6000 0.0225 - -
25 200 6000 0.03 - -
40 100 6000 0.024 - -
40 150 6000 0.036 - -
40 200 6000 0.048 - -
50 100 6000 0.03 - -
50 150 6000 0.045 - -
50 200 6000 0.06 - -

Resin major moves, but they are few. The density is quite high (500 kg / m3), but applies to products that are not subject to heavy loads. Basically, this thread. The most popular decoration products made of wood - wax. On the positive side, it is worth noting - resistance to rot.

It has a nice pink color wood, which over the years becomes a riot of red noble. From its pine resin characterized by high conductivity. On the saw cut is not visible to the naked eye moves resin and tree rings. Breed durable medium (500 kg / m3), making frequent use is in the construction of houses, the furniture industry, paper industry, mechanical engineering. Easily handled, resistant to decay.

The wood of this breed is white in color, with a slightly yellowish tinge. The strength and density (445 kg / m3) are slightly inferior to the pine tree. Because of a large number of branches heavier processed. Spruce we have used, for the most part, for paper production, as well as musical instruments. A little part is used for export (fir lumber).

The color of wood core red-brown. Offers excellent resistance to wetting and rotting enough frost. Density greater than pine (660 kg / m3). It is used for outdoor structures, and for the manufacture of furniture, house construction, the manufacture of flooring, pulp - paper industry. To cut clearly visible growth rings and resin passages.

The color of the wood rich white has a pink hue. Texture soft, easily cut, basically, does not crack. Used in the manufacture of pencils, drawing boards, manufacture of mosaic compositions.

Due to its properties linden among the best materials for carving. Perfectly amenable to the production of her drawings of varying complexity

Beech family. The German name - Eiche, English - Oak, Italian - Quercia Rovere. When cut the color is yellowish - brown. Over the years, becoming more noble darker shade. Excellent strength of the wood allows the use of oak in construction. It dries rather slowly, resistant to many external influences. It has excellent density - 700 kg / m3, hardness:. 3.7 - 3.9. Often used oak stained.

The kernel has a grayish-brown color. Small stocks of chestnut wood do not give it universal application possibilities. Basically, it goes to rivet barrel for wine, the production of veneer furniture. Waste chestnut enriched with tannins, hence the extensive use of tanning. It has a high density, but a little firmness.

Core light ash - brown. Durable texture, but often crack when dry. But the well-dried ash extraordinarily beautiful in the finished product. Used for the production of sports equipment, furniture, railings, veneer for parquet production, shipbuilding. Mature ash is considered from 80 to 100 years. It has a density of about 700 kg / m3.