Пиломатериалы | Прайс и цены на пиломатериалы | Продажа пиломатериалов оптом


gallery/магнетрон 3

High power magnetron generator type, which is widely used in microwave heating system. Its main characteristic is high power, high efficiency, low operating voltage, small size, and low cost, etc. Magnetrons may be classified as a continuous wave magnetron. These magnetrons are used primarily for microwave heating in industrial, agriculture, mining. Unlike pulse magnetron used for precision measurement in radar, onboard radar and other linear accelerators.

PCC "StroyServis" offers design and production of turnkey individual microwave generators with low power consumption and high standard ISM frequencies. Our technical staff will assist you in setting up a new system or be upgrading an existing on your requiremen


 CK-2031 - CW magnetron fixed frequency, used in microwave and plasma generators. CK-2031 has a metal-ceramic housing, impeccable strength, suitable for industrial applications. A special cathode, to continue the drain of the service. A special device for the internal cathode terminal to minimize the leakage of wave radiation. Operating frequency: 915 (896, 922, 929) MHz. Minimum power: 60KW





896 MHz +/-10 MHz
915 MHz +/-10 MHz


896 MHz +/-5 MHz
915 MHz +/-5 MHz

Power 60 kW Power CW 60 kW
Anode voltage 17 kV Anode voltage 16 kV
Anodic current 5.0 A Anodic current 4.5 A
Efficiency 85+% Efficiency 88%
Voltage 12.6 V Voltage 12.0 VAC
Current 115 А Current (in standby mode) 115 A
Max. Water inlet pressure 100 psi Current (in operating mode) 112 A
Max. VSWR load 1.5:1 Max. VSWR load 3.5 A
Max. Outlet water temperature 70 °C Electromagnetic current 1.2:1
Max distribution at the anode - Water flow rate 3 l / min.
MECHANICAL CHARACTERISTICS Cooling at temperature 15 °C
Mounting position Any Air flow to the cathode 5 cfm
Connecting Terminals See Contour Air flow in housing 20 cfm
Diameter 4.94 mm    
Length 18.55 mm    
Weight 6.81 kg